Upgrade your electronics with high-precision picofarad (pF) ceramic capacitors in the picofarad (pF) range — ideal for tuning circuits, RF applications, oscillators, and timing systems. Our collection includes values from 1pF to 1000pF, available in various voltages (50V to 5kV) and stable dielectric types like C0G/NP0. Whether you’re building a radio, calibrating filters, or repairing vintage electronics, Dukatronic delivers reliable, tested components you can trust.
Engineered for minimal temperature drift and high-frequency stability, these capacitors are a go-to choice for professionals and DIYers alike. Each unit is selected for quality performance in demanding conditions, helping you achieve precision and consistency in signal-critical applications.
Picofarad Ceramic Capacitors Description
Ceramic capacitors in the picofarad (pF) range are essential components in high-frequency and signal-sensitive applications. Typically ranging from 1pF to 1000pF, they are commonly used in radio frequency (RF) circuits, oscillators, timing networks, filters, and communication systems — where precision and low capacitance are critical.
Our pF ceramic capacitors are built using stable dielectric materials such as C0G (NP0), known for their excellent temperature stability, minimal capacitance drift, and low losses. This makes them ideal for circuits where frequency accuracy and signal clarity are a must.
Each capacitor in our collection is rigorously selected for voltage reliability, ranging from 50V up to 1000V, allowing flexibility across different circuit requirements. Whether you’re replacing a faulty cap in a radio tuner or designing a new signal filter from scratch, these components deliver consistent performance and long-term reliability.
At Dukatronic, we understand that choosing the right capacitor goes beyond just capacitance — that’s why we offer clear labeling, value variety, and affordable pack sizes for beginners, students, and seasoned electronics enthusiasts. Whether you’re prototyping or performing repairs, our pF range gives you the headroom to experiment and the quality to finalize your designs.
Technical Specifications of pF Ceramic Capacitors
Below are the most common picofarad value capacitor specs that you will come across at our shop…
| Parameter | Details |
| Capacitance Range | 1pF to 1000pF (1pF, 2.2pF, 4.7pF, 10pF, 22pF, 47pF, 100pF, 220pF, etc.) |
| Voltage Ratings | 50V, 100V, 250V, 500V, 1kV, 5kV (depending on the value and the type) |
| Tolerance | ±1%, ±2%, ±5%, ±10%, ±20% (value-dependent) |
| Dielectric Type | C0G (NP0), X7R |
| Temperature Range | -55°C to +125°C |
| Mounting Type | Through-Hole (Radial), SMD (available upon request) |
| Lead Spacing | Typically 2.5mm to 5mm (radial type) |
| Package Options | 5 pcs, 10 pcs, 50 pcs (available upon request) |
| Applications | RF circuits, oscillators, high-frequency filters, antenna-matching networks |
Capacitance Range
Here’s a full list of common and widely available picofarad values that are available at our Dukatronic shop.
| Capacitance (pF) | Standard E-Series Values |
| 1pF | E6/E12 |
| 1.5pF | E12 |
| 2.2pF | E12 |
| 3.3pF | E12 |
| 4.7pF | E12 |
| 5.6pF | E24 |
| 6.8pF | E24 |
| 8.2pF | E24 |
| 10pF | E6 |
| 12pF | E12 |
| 15pF | E12 |
| 18pF | E12 |
| 22pF | E6/E12 |
| 27pF | E24 |
| 33pF | E12 |
| 39pF | E24 |
| 47pF | E6/E12 |
| 56pF | E24 |
| 68pF | E24 |
| 82pF | E24 |
| 100pF | E6 |
| 120pF | E12 |
| 150pF | E12 |
| 180pF | E12 |
| 220pF | E6/E12 |
| 270pF | E24 |
| 330pF | E12 |
| 390pF | E24 |
| 470pF | E6/E12 |
| 560pF | E24 |
| 680pF | E24 |
| 820pF | E24 |
| 1000pF (1nF) | Technically nF territory, but often included in pF listings |
Voltage Ratings
Ceramic capacitors in the picofarad range are available in a variety of voltage ratings to suit different circuit demands. These voltage ratings determine how much electrical pressure (voltage) the capacitor can safely handle before breaking down.
Here’s a list of common voltage ratings available for pF ceramic capacitors:
| Voltage Rating | Typical Use Cases |
| 50V | Low-voltage signal circuits, basic timing circuits |
| 100V | General-purpose applications, microcontroller-based systems |
| 250V | Slightly higher voltage circuits, industrial control boards |
| 400V | High-voltage signal filtering, amplifier circuits |
| 500V | Tube amplifier systems, motor controllers, advanced RF systems |
| 630V | RF transmission, vintage audio repairs, lab equipment |
| 1kV (1000V) | Specialized high-voltage electronics, flyback driver circuits, x-ray systems |
Note: The availability of specific values (e.g. 22pF, 100pF) in higher voltages like 500V or 1kV may vary. Higher voltage capacitors tend to be slightly larger in size and are typically used in more demanding or high-frequency environments.
Dielectric Types in pF Ceramic Capacitors
The dielectric material in a ceramic capacitor plays a major role in its performance, stability, temperature behavior, and frequency response. For pF capacitors, especially in signal-critical and RF applications, dielectric type matters a lot.
Here are the most common dielectric types used in picofarad ceramic capacitors:
Class I Dielectrics (High Stability & Precision)
These are ideal for applications requiring low loss, low drift, and excellent frequency stability.
| Dielectric Code | Features | Typical Use |
| C0G / NP0 | Ultra-stable, low loss, ±30ppm/°C, ±5% tolerance | RF circuits, oscillators, filters |
| P100 / N1500 | Low-temperature coefficient, medium stability | Timing and tuning circuits |
| NPO (Same as C0G) | Extremely stable across temperature and frequency | High-quality audio & RF circuits |
Class II Dielectrics (Higher Capacitance, Less Stability)
Used when size and capacitance matter more than precision.
| Dielectric Code | Features | Typical Use |
| X7R | Good balance, ±15% tolerance, moderate temp stability | Decoupling, general use |
| X5R | Similar to X7R, but lower max temperature (+85°C) | Space-saving general-purpose caps |
| Y5V | High capacitance, poor stability, up to ±22% tolerance | Where stability isn’t critical |
| Z5U | Low cost, high capacitance, poor temperature response | Temporary or cost-sensitive circuits |
Key Tips for Buyers:
- Choose C0G/NP0 for any RF, timing, or audio applications requiring ultra-low drift and high Q factor.
- X7R and X5R are good for decoupling or bypassing applications but not ideal for critical timing or filters.
- Y5V and Z5U are budget-friendly, but not suited for precision.
Eric –
Got high-quality ceramic capacitors for my project from Dukatronic shop. The delivery was also on time. I recommend them anytime.